Leave a comment

2 Systems = Rainwater for Fruit Trees

It is always a pleasure for us to go out and educate potential clients. This potential client was delighted to know that the rainwater tanks he had purchased did not have to go right by the barn as he originally thought they would have to.

In our original visit, we proposed the tanks go under the trees. Since they were polyurethane, this does two things. Protects the tanks from the sun and weather, and keeps the water cooler since the tanks set in the shade. It also camouflages the tanks somewhat as well as they blend into the scenery instead of being out in the open.

Below are a few pics of our initial tank placement prior to installation.


We put in quite a bit of hard work on both these systems, solving multiple concerns as we worked. The end result was a drier barn arena, water collecting from two separate gutters into two separate tanks, submersible pumps installed in each for on demand water use. We think we did pretty well at surpassing the customer’s requests.

The tank furthest away had the shortest plumbing run but it has all the standard features we include: tank foundation, first flush diverter installed on treated lumber, water level monitor, system cleanout drain, spigot and overflow. The end result of several days of planning, trenching and gluing pvc is below.


The second system had the longer PVC and the deeper trenching because we actually brought the overflow back out into the pasture next to the barn in the same trench. It was fun to design and implement. This system also included all our standards for installation. The end result is shown below:

FullSizeRender (24)

Within 2 weeks of installation, both tanks were full. Only 2 rainfall events filled these tanks to overflowing. See pics below of water level meters showing full:


We can’t begin to explain how rewarding it is to go out and serve people by helping them conserve our most precious resource, water. Bringing their rainwater system dreams to life is a privilege we do not take lightly.

Leave a comment

Gutter: Rainwater Harvesting Term of the Week

This week’s word of the week is Gutter. Guttering is generally installed around the roof surface edges to direct water off the roof in an orderly fashion instead of the water running off the roof in every direction all helter skelter. Our recommendation is installing seamless gutter which allows for maximizing water capture.

Gutter Shown here on our Mobile Harvesting Demo

Gutter is defined as the following according to dictionary.com:
  1. a channel at the side or in the middle of a road or street, for leading off surface water.
  2. a channel at the eaves or on the roof of a building, for carrying off rain water.
  3. any channel, trough, or the like for carrying off fluid.
  4. a furrow or channel made by running water.
  5. Bowling. a sunken channel on each side of the alley from the line marking the limit of a fair delivery of the ball to the sunken area behind the pins.

verb (used without object)

  1. to flow in streams.
  2. (of a candle) to lose molten wax accumulated in a hollow space around the wick
  3. (of a lamp or candle flame) to burn low or to be blown so as to be nearly extinguished.
  4. to form gutters, as water does.

verb (used with object)

  1. to make gutters in; channel.
  2. to furnish with a gutter or gutters: to gutter a new house.

Origin: 1250–1300; Middle English gutter, goter  < Anglo-French goutiere, equivalent to goutte  drop (see gout) + -iere,  feminine of -ier -er2

Gutters are very important in the rainwater harvesting process. Keeping them clean and free of debris for optimum water flow as well as water quality is important. Branches may need trimming to achieve this. There are several methods of keeping the actual gutter trough clean as well. Screen is an option but still allows small debris to travel with the water. We prefer a fine gutter foam that installs right into the gutter and prevents most of the larger debris from entering the rainwater harvesting system. This foam can be taken out of the gutter and hosed off as well much as you can hose off a re-usable air filter for your air conditioning system in your home.

Guttering the entire catchment surface gives you optimum rainwater harvesting capability. If guttering is already installed, then you are left with deciding where to put your tank or cistern and where to direct any overflow. This determines where the downspout and first flush diverter (FFD) will be placed.

If you do not have gutters already installed, it is easy to have them put up. They can also be placed where the downspouts are already in the proper placement for optimum rainwater output. If you are unsure about whether you have the proper guttering to install a system designed to capture all the rainwater your roof can provide, give us a call. We specialize in estimating and designing a system that is tailored to your needs with maximized water efficiency in mind. We also offer maintenance programs that ensure your system is at it’s peak performance year round with no need for cleaning gutters anymore!

Next week we will discuss and define another Rainwater Harvesting System Term. Follow our Blog so you don’t miss it! Thank you for sharing this info with your friends or people you think are interested in it. 

Comments and/or questions are Welcome!

RainDrop Harvesting Solutions, LLC